Best Iron Filter For Well Water
High levels of iron in water may cause several problems throughout your household. It is important to test your water and find the problem right away.
Did you know that your bathroom and kitchen appliances may have reduced performance due to contaminants? Also, pipes might get clogged and probably you have noticed stains on the shower, tub, clothes, and sink.
But most importantly high levels of iron will affect the taste in water, adding to it a metallic taste and reddish-orange, yellow, or brown color.
All these problems if neglected can lead to more maintenance for your appliances and increased costs.
However, there are systems powerful enough to get rid of all the iron and other contaminants found inside well water.
What is the best iron filter for well water?
Below you have a table with the best and after that a short review for each of them.
*Some links may be Amazon affiliate links. We may get paid if you buy something or take an action after clicking one of these*
Express Water Whole House Water Filter
iSpring WGB32BM 3-Stage Whole House Water
Home Master Whole House Three Stage Water Filter
APEC 3-Stage Whole House Water Filter System
Soft Pro Iron Master AIO Water System
Flexx Infusion Iron And Sulfur System
Crystal Quest Iron Whole House Water Filter
1. Express Water Heavy Metal Whole House Water Filter
The Express Water whole house filter is a complete solution against heavy metals in general including iron. It has been designed with longevity in mind, only from food-grade materials. Every component is tested and validated to match ANSI / NSF standards.
Besides metals, it can also remove sand, viruses, VOCs, odors, silt, turbidity, insecticides, chloramine, cloudiness, fungi, dirt, sand, and many more contaminants.
It is very capable due to the three powerful filters it has. The first stage is sediment, the second one is a kinetic degradation fluxion filer and the last one is an activated carbon block.
The three housings are built from durable food-grade PCE and ABS plastic. They come equipped with industrial bonded large capacity flow connectors. Each connection can go up to 0.25 gallons per second at 45-80 psi.
What’s really convenient is that the first filter is transparent allowing you to see when it needs to be replaced. They can easily replace this system includes a simple twist-off housing and drop-and-go filter design. You can also install pressure release buttons for even easier removal.
Also, you can monitor its performance if you’re interested, this iron filter for well water has included three pressure gages. It will also allow you to see which filter needs to be changed.
2. iSpring Whole House Water Filtration System
This model of the ISpring water filtration system is designed with the removal of iron and manganese in mind. It can reduce a maximum of 3.0 ppm down to 0.01 ppm and manganese from 1.0 ppm to 0.01 ppm. And it has a filtration capacity of 50000 gallons of water.
It can also get rid of chlorine, pesticides, industrial solvents, rust, sediment, VOCs, and other types of contaminants.
The filters included with this water filtration system can last 3 times more than greensand ones because the catalytic media doesn’t get used in the process.
And they also have increased quality, the first stage carbon block filter is made out of top-grade coconut shell carbon in order to achieve the best filtration efficiency and life. It’s also tested to meet NSF/ANSI standards.
Both filters have a capacity of 100,000 gallons of water which can supply a family of four for around a year.
For well water usage the producer recommends that you test your water for impurities first in order to achieve the best results.
This device is a solid choice if you’re on well water and don’t have high levels of iron or manganese. It reduces other types of contaminants and has long-life filters.
What’s convenient is that it requires little maintenance, it’s easy to install, and doesn’t has a big impact on water flow.
3. Home Master Whole House Three Stage Water Filtration System
The home master whole house filtration system is a potent solution to combat iron and other impurities found in water. This system features massive housings which lead to a better flow rate of up to 15 per minute.
It comes with three powerful filters, radial flow iron, multi-gradient sediment, and radial flow carbon. Which can get rid of manganese, iron, and hydrogen sulfide contamination up to around 3 ppm combined load.
And thanks to the multi-gradient sediment filter it will hold a greater capacity of dirt and produce a finer filtration.
The home master filter will also remove odors, foul tastes, and staining even dirt, rust, sediment, and chemicals without affecting the water pressure.
You’ll also save money with this device since it features a long-lasting coconut shell carbon filter that can last up to 95,000 gallons without needing to be changed.
However, it doesn’t come without limitations, it can’t be used for acidic water <7ph, chlorinated city water, or iron bacteria. It is recommended to test your water’s level of impurities before buying one.
Overall the home master whole house water filter is a great choice to remove iron from well water and other impurities. But for higher levels of iron, you’ll need a more powerful water softener system.
4. APEC 3-Stage Whole House Water Filter System
The whole house filtration system from APEC is another great way to combat iron and other impurities found in water. It has a 3 stage system designed to combat odor, staining, and light sediment.
The first stage is meant to get rid of sand, silt, rust, and dirt, it contains a 30-micron sediment filter that can be reused. The second stage is a potent iron filter that removes brown, orange, and red stains and removes the metallic taste. And finally, the last stage is a 25-micron carbon filter which removes chlorine.
You won’t have to worry about maintenance either since it comes with long-lasting filters that can work for 80,000 gallons of water before needing to be changed. It is constructed from durable reinforced polypropylene which makes it withstand pressure from various applications.
No extra work is needed on your side it comes pre-assembled and ready to be installed in your household water network.
Overall, the Apec whole house water filter is a great choice to get rid of iron from well water and enjoy clean water without any harsh chemicals and other impurities. It doesn’t require much maintenance, it’s durable and easy to install.
5.SoftPro Iron Master AIO Water Filtration System
The SoftPro Iron Master is an air injection system made to remove high levels of iron, manganese, and hydrogen sulfide.
It features an advanced technology called Air Injection Oxidation which boosts iron removal by using air as a natural oxidizer.
This system has a high-performance control valve with 1-inch ports which provides a high flow of water through your household. There are multiple versions available ranging from 5GPM to 10 GPM.
The smart control valve will start to work when you activate the vacation mode, which will stop the softener from regenerating while you are away. If water is not used for more than 7 days the system will start a quick refresh process to prevent bacteria from growing.
You won’t have to worry about hurting the environment or toxic chemicals either, it operates and can be cleaned only using water.
The main feature of the IronPro filter is that it can remove high amounts of iron, up to 30 ppm. This system removes the highest levels of iron compared to the competition. And can remove up to 7ppm manganese and 5ppm hydrogen.
It’s also made from premium materials making it one of the best whole house iron filters for well water.
The katalox media will last up to 10 years based on your iron and other metals levels. On certain types of water, it will require to be changed from 3 to 5 years.
6. Flexx inFusion – Iron And Sulfur System
The Flex inFusion is a powerful system that can remove high amounts of iron, manganese, hydrogen sulfide, and bacteria. And it can also get rid of sediment, silt, sand, and cloudiness.
This system is very easy to use it programs itself only in 30 seconds, the electronic controller has only one internal moving part making it easy to be set. It also has a useful meter on which you can see how many gallons have you used and check for the flow rate.
The extended life of the system is guaranteed by the automatic backwashing process. Every two days the automatic backwashing will be performed by the Flex control valve which will clean the bed. And when it’s needed it can be done every day.
The contaminants are removed using a process called oxidation. It works by pumping a constant flow of hydrogen peroxide and using Catalytic carbon filtration media to remove iron and hydrogen sulfide — which is the cause of rotten egg smell.
This technology is not new it has been used in the past as well. It is still used today because it’s very effective, especially at oxidizing sulfur compounds without creating toxic byproducts.
Overall this system is a potent solution to get rid of iron from your well water and remove other contaminants. It’s user-friendly, requires little maintenance, and can be controlled with your phone.
The smart valve connects to your phone via Bluetooth you can do so using the app Waterlogix. You’ll have access to settings and a real-time dashboard.
The professional-grade tank and the smart valve are combined for you to get one of the best whole house water filter for well water with iron.
7. Crystal Quest Iron Whole House Water Filter
The Crystal Quest is a versatile system that can remove high amounts of iron, hydrogen sulfide, and manganese. It can remove up to a whopping 15 ppm of iron, 10 ppm of manganese, and 5 ppm of hydrogen sulfide.
It works using a pre-filtration process that sends water through a 20-inch sediment cartridge that gets rid of sand, dirt, and slit.
After this process is done water goes through a post-filtration cartridge that removes pesticides, VOCs, and other industrial solvents.
Heavy metals like iron, hydrogen sulfide, and manganese are removed through the mineral tank which also has an addition of media to prevent bacterial growth.
If you need extra filtration you can also add the Smart Filter which combines two types of special media and anion exchange resin.
It can remove various types of contaminants like heavy metals, chloramine, chlorine, herbicides & pesticides, and other inorganic substances.
And to complete the filtration package a water softener can also be added.
A water softener will help you get rid of stains on the shower, tubs, sinks, and clothing. And to prevent limescale deposits which can block your pipes and reduce the efficiency of boilers and tanks.
Limescale may also affect your household machinery such as the washing machine or dishwashing machine.
Overall the crystal quest is a great system that doesn’t require much maintenance, the backwashing process is automatic. And it’s fairly easy to install if you have some experience with DIY things.
Best Iron Filter For Well Water Buyers Guide
First of all, you should analyze your water and find exactly what contaminants need to be removed. This will help you make a better decision when buying a whole house water filter system. For example, let’s say your levels of chloramine are high, it would make more sense to buy a system with filters that can remove it.
But, there are also other important features that you need to look out for:
Filters are quite an important part to consider when buying a water filter for well water. They determine what type of contaminants can be removed, the filtering capacity, and the maintenance of the whole house filter.
You have to take into consideration the size and filter flow rate of a filter. Most filters are designed for a household of four members and they can last five or even ten years.
If you pick a smaller size than needed, you’ll end up with more maintenance, which can lead to changing the filters every year.
You also have to look out for the flow rate of the whole house water filter and make sure you get one that has enough pressure for your household.
Also, a smart thing to know is what ppm of iron you have in your water because the removal potency of water filters differs from each other. Most conventional water filters will remove iron below 3.0 ppm. If you have high levels of iron it is recommended to use an air filter injection system.
Maintenance has to be taken into consideration as well, if you neglect this aspect the system won’t function properly.
Each iron filter system has different maintenance needs.
Whole house water softener systems have usually three stages of filtration which the water passes through.
Each of the filters films in time will need replacing, not doing so you’ll end up with a useless water filter.
The frequency of maintenance depends on the levels of contaminants found in your water. And the quality of the filters films.
Other types of water softener systems like salt-based ones will need you to just keep the salt at optimal levels. And at least once a year to check if any parts have worn out and clean the water softener.
All types of iron water filters will require installation at your household water source. It’s the place where your house gets water from being it well water or other types.
And in some cases, it’s required to be installed outside between your well and your house.
Installation generally can be done by anyone without requiring to call a plumber. And it should not take very long usually an hour of work.
But there are some cases where you may need to cut your water line pipes if you don’t feel comfortable doing that it’s recommended to call a plumber.
Frequently Asked Questions?
How to remove iron from well water
There are multiple ways of removing iron from well water including a water softener, air injection system, and whole house water filters.
What to choose you may ask? It depends on the hardness level of iron found in your household water.
Water softeners can remove soluble iron but at low levels, they are more effective at removing other types of contaminants from water. Like calcium and magnesium which can clog your pipes.
Over time even with low concentrations of iron it won’t keep up and get clogged. It’s pretty common to see an air injection system combined with a water softener.
However, other types of systems can be more effective.
Whole house water filter can be effective at removing iron up to 5PPM both soluble and insoluble from well water. Most whole house filters will remove sediment, metals, and other types of impurities. This is possible because most systems are using a three-stage filtration process.
But whole house filter systems can’t remove the same contaminants as a water softer. And based on your needs a combination of two would be optimal.
These types of systems can be a bit more expensive but for a good reason they can filter out high levels of iron.
They work as the name suggests using compressed air and oxygen which is a good oxidizer for iron, manganese, and sulfur.
How exactly does it work? At the top of the tank, a head of compressed air is formed on which the system adds oxygen. As the water passed through the system, iron and other metals like sulfur and manganese get oxidized.
Then it passes through a bed of media which can be different for each system and separates the oxidized iron and other metals from water.
This process will keep going for three days then the system will start to regenerate and clean the oxidized iron. Most systems have a control valve that can change the regeneration time.
Unless like a water softener there is no need to change the filter media or brine because it lasts as the system itself. The regeneration process works only using your household water pressure.
And do I need to tell you about oxygen? It is found everywhere in the air so it is free. 😊
How does iron affect the water?
Iron is one of the earth’s most plentiful resources. But it can have a negative effect on the water even in low concentrations.
Iron can be found in water in two forms: either insoluble ferric iron or soluble ferrous iron.
The water containing ferrous iron is clear and colorless because the iron is dissolved. If exposed to air in the atmosphere or in a pressure tank the water will start to turn reddish-brown. This sediment is the form of ferric iron which does not dissolve into water.
When iron is dissolved in water it can give it a bad metallic taste. If you cook vegetables in water containing high levels of iron they will turn black and start looking nasty. It will also affect the taste of beverages like coffee, tea, and others.
Your appliances and laundry will suffer too since iron even in concentrations as low as 0.3 mg/L will leave behind stains that are hard to remove. And when the deposits will start to break, you’ll notice rusty water flowing through the faucets.
However iron is not bad for your health, according to WHO iron is essential for human nutrition. It helps transport oxygen in the blood.
What is the best iron filter for well water?
For most people, a safe choice would be a whole house water filter, it will ensure clean water throughout your home at a reasonable price.
It can filter metals, pesticides, VOCs, and other types of contaminants from well water. Will not require much maintenance and is easy to install.
This isn’t an answer for everyone because well water is not the same. The best thing to do is to test it and see what types of contaminants you need to remove.